Click-To-Call 763-559-7867

Viking Pump has been manufacturing heavy duty industrial pumps since 1911. These products are engineered for a wide range of applications and are in service in industries such as chemical and food processing, oil and gas, asphalt, bio fuels, and many more. Viking Pump not only designs and manufactures positive displacement pumps, they also operate their own domestic iron and alloy foundries. This allows for complete quality control.

Edelmann & Associatesis proud to carry the products of this globally recognized manufacturer. We service customers throughout Minnesota, western Wisconsin, North Dakota, and South Dakota with Viking Pumps lines of internal and external gear pumps, vane pumps, and rotary lobe pumps.

Watch Viking Pump Videos

For personalized assistance with selection & sizing of Viking Pumps, fill out the form on the right >>>

Additional Resources

Specific Industry Application Pump Recommendations – Asphaltic Roofing, Adhesives, Alcohols, Edible Oils, Resins, Starch, Sugar Processing, Wax

Eliminate Leaky Pumps with Viking Pump O-Pro Seals

Working Safely with Ammonia Refrigeration Pumps

Is it the Season for Asphalt Pump Repair ?

Information Source Viking

Viking Pump Product Specifications Library

Visit this library for extensive information, technical specifications, pump curves, videos and brochures on all of Viking Pump products.

VIEW DETAILED INFORMATION ON VIKING PUMP MODELS

Viking Pumps Selection

Internal Gear Pumps

The internal gear pump is the “workhorse” of countless manufacturing processes. The Internal Gear Pump was invented by Viking Pump’s founder, Jens Nielsen, in 1904. It is used in manufacturing many of the products that we all touch every day.

Broadest selection of materials, designs, seals, ports and displacements
Adjustable clearances enable handling viscosities from 28 to 2,000,000 SSU (1 to 440,000 cSt)
Low shear
Reliable & Easy to Maintain – Only two moving parts
Adjustable End Clearances – For low or high viscosities, high temperatures, or to compensate for wear over time
Shaft Seal Options – Including packing, lip seal, component seal, cartridge seal and sealless mag drive
Porting Options – Viking’s broadest selection of port locations, configurations and types
Smooth, Non-Pulsing Flow – For accurate flow measurement
One Shaft Seal – More reliable and lower cost than two or four seals used on timed lobe and screw pumps
Compact, Close-Coupled Options – For motor speed operation or with gearmotors

Max. Capacity: to 1600 gpm
Viscosity: 28 to 2,000,000 SSU
Max Temp: 120°F to +800°F (-85°C to +430°C)
Max Pressure: to 250 PSI (17 BAR)

Common internal gear pump applications include, but are not limited to:

All varieties of refined fuels & lubricants
Resins & polymers
Alcohols & solvents
Asphalt, bitumen & pitch
Polyurethane foam (isocyanates, polyols & additives)
Food products such as corn syrup, chocolate & peanut butter
Paint, inks & pigments
Soaps & surfactants
Heat transfer fluids

Universal Product Line

Cast Iron

Rugged and reliable, yet economical
Widest range of sizes and options available to suit almost any non-corrosive application
Tightest clearances for high efficiency and excellent priming capability

Steel Externals

For refinery and petrochemical applications
Recommended for extremely high temperatures
Widest range of sealing options available

Stainless Steel

For corrosion resistance over a wider pH range
Non-galling gear materials available for handling thin liquid applications
All stainless steel construction or economical 724 & 4724 series

Motor Speed Pumps

Cast Iron

The most compact gear pump series available to fit tight space constraints
High speed operation for the most economical pump option for thin to moderate viscosity applications
Vertical mounting options to further reduce the unit footprint

Steel Externals

Close coupled to fit tight space constraints with vertical mount options for reduced unit footprint
High speed operation for economical steel pump offering
High working pressures for compressor lubrication and pipeline sampling applications
Class 300 flanges standard on all sizes and models

Stainless Steel

For corrosion resistance over a wider pH range
Non-galling gear materials standard for handling thin liquid applications
Compact gear pump series to fit tight space constraints

External Gear Pumps

The external gear pump is the ultimate solution for high pressure pumping.

Bearing support on both sides of the gears enables differential pressures to 500 PSI (34 BAR), or Intermittent to 2,500 PSI (170 BAR)
Motor speed operation eliminates cost of speed reducer
Eliminates lubrication – no external axial or radial bearing required in most applications

Common external gear pump applications include, but are not limited to:

Various fuel oils & lube oils
Chemical additive & polymer metering
Chemical mixing & blending (double pump)
Industrial & mobile hydraulic applications
Low volume transfer or application

Max. Capacity: to 190 gpm
Max. Viscosity: 28 to 1,000,000 SSU
Max Temp: -40°F to +450°F (-40°C to +230°C)
Max Pressure: to 500 PSI (34 BAR) Intermittent to 2,500 PSI (170 BAR)

Higher Pressure Capabilities – With shaft support on both sides of the gears

Multi-Section Pumps – Use one motor for multiple pumping applications, blending liquids, or splitting flows to different uses

Shaft Seal Options – Including lip seal, component, mechanical seal and sealless mag drive options

Compact, Close-Coupled Options – For motor speed operation or with gearmotors

Smooth, Non-Pulsing Flow – For accurate flow measurement

Reliable & Easy to Maintain – With only two moving parts

One Shaft Seal – More reliable and lower cost than two used on timed lobe and screw pumps

Spur Gear Pumps

Cast or Ductile Iron Configurations

Needle bearings provide high pressure capabilities, sleeve bearing options available
Close-coupled motor mount or foot bracket options to match space or motor requirements
Double pump configurations offer two flow rates operating from a single power source, reducing equipment costs
Spur gears offers higher pressures and unique abilities to supply multi-section specialty pumps with one driver.

Liquid Specific Pumps

Through 100+ years of pumping experience, Viking Pump engineers have developed uniquely designed products with a specific application in mind. These products focus on solving targeted challenges that exist within that liquid application. From speed to viscosity, sealing or shear, these products provide additional security that the product is right for the applications they are built for.

Abrasive Liquid Pumps
Asphalt Pumps
Thin Liquid Vane Pumps
Refrigeration Ammonia Pumps
Fuel Oil Pumps
Sensitive Solids Idler

Viking Pump Parts & Accessories

Viking Pump parts kits provide customers with the ability to do a complete repair at once vs. each time a part wears. Everything needed is included in the kit, ready before you open the pump. Both seal kits and repair kits are available. Reduce your downtime by contacting your local stocking distributor to have a kit on your shelf ready to go when it is needed.

Only Viking Pump Genuine Parts are specifically designed to meet performance requirements for Viking pumps
Viking Pump Genuine Parts are tested to ensure optimum reliability
Viking Pump backs all Genuine Parts with its own warranty and stocking distributor network

In addition to Viking Pump Part Kits, we also offer:

Reducers
Strainers
Motors

At Edelmann & Associates, we know Viking Pump