Slurry Pumps - M
BRAND: Worthington
The M hard-metal slurry pump is a horizontal, single stage, end suction design with a tangential discharge nozzle. Fitted with a hard metal liquid end, the M pump is engineered to handle high concentrations of coarse, abrasive solids in suspension.
Product Highlights
Industries
- General Industry
- Water
- Oil & Gas
Industry Sectors
- Pulp & Paper
- Mining
- Steel & Primary Metals
- Waste Water
- Upstream Exploration & Production
Standards
Flowserve
Operating Parameters
- Flows to 10,000 m3/h (44,000 gpm)
- Heads to 90 m (300 ft)
- Pressures to 10 bar (150 psi)
- Temperatures to 120⁰C (250⁰F)
- Solids from 2% to 70% by weight
Design Range
Size Range: Discharge Sizes from 65 mm (2.5") to 610 mm (24")
Features and Benefits
- One-piece high chrome iron, concentric casing with replaceable gland and suction side wear plates
- Closed impeller with pump-out vanes on front and rear shrouds
- Standard packing stuffing box with replaceable wear plate
- Full and low-flow flush connections
- Heavy-duty bearing frame designed for V-belt loads
- Cartridge style bearings
- Parts interchangeable with R pump
- Three-point external end clearance adjustment
- Options – Vortex semi-recessed impeller – Hard metal expeller – Mechanical seal housing
Industries
- General Industry
- Water
- Oil & Gas
Industry Sectors
- Pulp & Paper
- Mining
- Steel & Primary Metals
- Waste Water
- Upstream Exploration & Production
Standards
Flowserve
Operating Parameters
- Flows to 10,000 m3/h (44,000 gpm)
- Heads to 90 m (300 ft)
- Pressures to 10 bar (150 psi)
- Temperatures to 120⁰C (250⁰F)
- Solids from 2% to 70% by weight
Design Range
Size Range: Discharge Sizes from 65 mm (2.5") to 610 mm (24")
Features and Benefits
- One-piece high chrome iron, concentric casing with replaceable gland and suction side wear plates
- Closed impeller with pump-out vanes on front and rear shrouds
- Standard packing stuffing box with replaceable wear plate
- Full and low-flow flush connections
- Heavy-duty bearing frame designed for V-belt loads
- Cartridge style bearings
- Parts interchangeable with R pump
- Three-point external end clearance adjustment
- Options – Vortex semi-recessed impeller – Hard metal expeller – Mechanical seal housing
- Related Literature
- Technical Information
- Online Tools