Electronic Water Pump

GMB Electronic Water Pump

We produce high quality electric water pumps for HEV, EV and FCV to major car manufacturers, applying the latest technology of the industry. Following are its main characteristics.

  • To the efficiency of fuel cell
  • To the reduction of noise and the weight saving
  • To the high durability
  • BLDC motor type (w/o hole effect sensors)

Lineup

Models HCC-20
(20W)
50W 100W DHC-200
(200W)
PMP-850
(200W)
Controller LIN
On/Off type
CAN
On/Off type
CAN
On/Off type
CAN
On/Off type
CAN
On/Off type
Capacity 16LPM / 0.1bar / 12V 25LPM / 0.35bar / 12V 30LPM / 0.7bar / 12V 45LPM / 1bar / 12V 45LPM / 1bar / 12V

Functions of Electronic Water Pump

GMB electric water pump is installed into HEV, EV or FCV in order to cool down the surrounding devices of these vehicles. Conventional mechanical water pump is powered by combustion engine to circulate coolant around the engine. Volume of coolant is in proportion to the engine revolution. Just control of coolant volume on demand is not mechanically possible. It may either overcool or undercool.
Electric water pump is activated by battery and motor only on demand for cooling. The just function minimizes the load on engine.

* Our electric water pump HCC-20 of 20W series which we are producing in a good volume, to the contrary, functions as auxiliary heater. HCC-20 circulates the heated liquid into the heating device when engine stalls.

Structure of Electronic Water Pump