PUMP-WHS-45-230V

ALL-IN-ONE WHOLE HOUSE WATER PRESSURE BOOSTING PUMP,1HP, 230V

$705.00

1 HP Horsepower, 62 psi Maximum Pressure
For Domestic Water Supply or Boosting Applications
Self-Priming Down to a Depth of 25 ft Within 5 Minutes
Compact and Reliable Design, Trouble-Free Operation
Easy to Install, Easy to Use, and Quiet Operation
Built-In Pressure Tank, Space Saving
Dry-Run Protection, Built for Long Operating Life
Weatherproof Material – Can be Placed Outdoors
Perfect for Homes, Cottages, Farms and Greenhouse

Skip to the beginning of the images gallery

Details

Trusted Quality in Every Component

The Grundfos pump is an all-in-one compact water boosting system that is designed for domestic water supply and other boosting or lifting applications. This multi-stage centrifugal pump can self-prime from a well depth of down to 25 feet within a maximum time of 5 minutes. Also, it is easy to operate and completely user friendly. The setting modes such as pump on, auto reset, and alarm are clearly displayed with an indicator light. A pressure switch and a pressure tank are built into the systems to ensure that water is readily available from the tap. When water is required, the pump automatically starts and no loss of pressure will be felt. You do not need to worry about any other separate items.

In addition, the pump incorporates an electronic protective function which will automatically stop the unit when the pump runs dry. And, the pump is cooled by the pumped water which eliminates the need for a chambersome noisy cooling fan. This is a great space-saving feature and allows the unit to be installed for domestic applications where low noise is a major consideration. Because the pump is made from weatherproof, corrosion-resistant materials, it can even be placed outdoors. The installation is extremely easy and can be done in a matter of minutes.

Design to meet the needs:

Water supply from wells
In private homes and weekend cottages
On farms or in market gardens
Delivers more power and faster water in your shower fixtures
Higher delivery pressure to support multiple fixtures
Rinse off in the shower when someone uses the bathroom faucet
Improves all water using home appliances operates

Sizing Chart & Discharge Pressure in PSI

PUMP-WHS-45

Maximum Inlet Pressure: 40 psi
Maximum Pressure: 62 psi
Maximum System Pressure*: 109 psi
Maximum Suction Lift: 25 ft.
Minimum Ambient Temperature: 32 ºF - 113 ºF
Liquid Temperature: 32 ºF - 95 ºF
Sound Pressure Level:
Pressure Tank Volume: 5 oz.
Air Pressure in Tank: 22 – 25 psi
Connections: 1" NPT

Electrical Data

Volts: Standard 115V or 230V optional
Power consumption
- (110-120V, 60Hz.): 1000/9.2 A
- (220-240V, 60Hz.): 1050/4.5 A

* Note: The maximum inlet pressure when added to the pressure pump must not exceed 109 psi. For example, with a 40 psi inlet pressure supplied to the pump, internal pressures can reach approximately 105 psi (65+40 psi).

Sample Water Pressure Booster System Setup & Performance

Length of horizontal suction pipe

Note: When installed the system outdoors, it should not be exposed to direct sunlight or rain. Maximum height of 50 ft between the pump and any tap is recommended.

More Information

SKU

PUMP-WHS-45-230V

Specification

High Performance System Components

User-friendly Control Panel	Control panel with indicator lights of actual setting - Pump on, auto reset and alarm (dry-running or overheating.)
Thermal Protection	If the pump overheats, it immediately stops and then automatically restarts after the cooling down period.
Dry-run Protection	If the pump runs dry, the pump automatically stops. It will then attempt to restart every half hour for a maximum of 24 hours.
Flow Switch	Enables the system to automatically stop the pump during normal operation when flow drops below 0.3 gpm, or shut off in 12-15 seconds after flow stops.
Built-in Check Valve	Incorporates a check valve which prevents backflow during priming and operation.
Built-in Pressure Tank	A small 5 oz. built-in pressure tank, ensure the water is readily available from the tap and minimize motor startup and stop.
Drain Plug	Drain the water out of the pump as the near freezing water begins to expand, which prevents the pump from freezing and becoming damaged during the winter season.
Anti-Cycling Features	Prevents the pump from continuously starting and stopping when you have a dripping tap or minor leak in the system.
Easy to Install	The outlet pipe connection can be angled up to 5° to fit your existing pipework. Also, the compact design makes the pump easy to place indoors and outdoors where space is limited.
Easy to Operate	Operates entirely by means of the control panel with just one simple touch button.
Quiet Operation	The pump is cooled by the pumped water which eliminates the need for a noisy cooling fan.

Pump Specification & Dimensions

ITEM#	PUMP-WHS-45
Motor	1 HP
Maximum Incoming Flow Rate	22 GPM
Dimensions	12.6"H x 22.4"W x 8.7"W
Weight	29 lbs

Reviews

ALL-IN-ONE WHOLE HOUSE WATER PRESSURE BOOSTING PUMP,1HP, 230V

Trusted Quality in Every Component

Sizing Chart & Discharge Pressure in PSI

Sample Water Pressure Booster System Setup & Performance

High Performance System Components

User-friendly

Control Panel

Thermal Protection

Dry-run Protection

Flow Switch

Built-in Check Valve

Built-in Pressure Tank

Drain Plug

Anti-Cycling Features

Easy to Install

Easy to Operate

Quiet Operation

Pump Specification & Dimensions

ITEM#

Motor

Maximum Incoming Flow Rate

Dimensions

Weight