Pre-packaged pumping systems serve a wide variety of purposes in the municipal space. Some are used to increase water pressure, or maintain a repeatable result with chemical treatment, while others may be in place to simplify maintenance or enhance safety. No matter what the reason, pumping systems have a place in many of today's water and wastewater treatment facilities. Read on to see if one of these systems might have a place in your process.
Now that we've covered the benefits of pre-packaged systems, let's dive into some examples of pre-packaged systems commonly found in water and wastewater applications.
A lift station is designed to move wastewater from lower to higher elevation when gravity conveyance is not feasible. A pre-packaged lift station consists of pumps, piping, valves, associated controls, which are all pre-installed in an enclosed structure prior to site installation.
The Gorman Rupp Above-Ground Submersible Valve Package (ASVP) system, pictured to the right, is an example of a pre-packaged lift station. This system consists of controls and valves enclosed by a durable fiberglass structure that is installed above ground. This feature eliminates the need for a separate valve pit and also improves worker safety by completely eliminating the need for service personnel to enter hazardous, confined spaces. Jackpot!
If the water pressure provided by a municipal water system (potable water - for drinking) is not sufficient enough to satisfy the needs of end-users, municipalities can install a system designed to automatically increase and decrease the number of pumps in use to help maintain constant pressure over a wide range of flow conditions. Water pressure booster systems generally include multiple pumps on a single structural steel fabrication with electronic controls, wiring, piping, valves and safety devices. The Grundfos BoosterpaQ system is a common solution for this (pictured to the right).
Now, if you're in wastewater treatment, you might be interested in using non-potable water (water that is not for drinking) to keep up with demand of the treatment process. Non-potable water can be attained from the final effluent of the plant through water reuse systems, which is a form of water pressure booster system.
Pre-packaged chemical feed systems are used in water and wastewater treatment applications. Where a chemical feed pump is installed, a pre-packaged chemical feed system, complete with pumps, valves, and controls for system functionality can take its place. These systems are designed from the ground-up meaning the system is custom fit to your application.
Whether you're looking to dispense chemicals for water treatment, reuse wastewater, or boost water pressure there's a turnkey, pre-packaged system for you. But, be sure to leave the system design and manufacturing to the professionals who have the knowledge, software, and expertise, and most importantly, the time, to create a system for your needs. Read more about how to get started with pump skid systems on our website!
If you're dealing with an application that would benefit from a pre-packaged system, ask us about it!
These Stories on Pumps
Headquarters and Service Center
707 Ford Street
Kimberly, WI 54136
920-733-4425
OptiFlow Design and Build Center
1002 Truman Street
Kimberly, WI 54136
920-733-4425
Service Center
12265 Nicollet Avenue
Burnsville, MN 55337
800-776-4425
Service Center
26489 Industrial Blvd
Cohasset, MN 55721
800-776-4425
© Copyright 2020. Crane Engineering. All Rights Reserved. Privacy Policy.